Parameters PE shrink film pe shrink film detailed parameters: width: 0.2m ~ 9m monolithic transverse tear strength: ≥40kn / m vertical tubular membrane 0.4m ~ 4.2m: ≥40kn / m thickness: 0.015mm ~ 0.35mm Tensile strength: Horizontal: ≥17mpa portrait: ≥17mpa shrinkage: 15% to 30% of the lateral longitudinal 50% to 70% elongation at break: ≥350% shrinkage temperature: 120 ℃ ~ 180 ℃ iceberg Neijing: 76mm weight: 0.925g / cm3 pre-stretch film Stretch advantages compared to the traditional cheap, poor quality, environmental protection, pe shrink film offer useful under the same weight, slim stretch film is three times the area of ??the actual packaging on the market of traditional stretch film about. Compared with the traditional stretch film pe shrink film for printing, saving considerable costs. And our green stretch film is pre-stretched single high strength sticky stretch film, quite easy to use, saving money . The outer surface of the packing material is not easy to stick dust, clean and sanitary. Supply pe shrink film, Red Plastic Factory (certified), shrink film is provided by Xiong Red Plastic Factory. Xiong Red Plastic Factory (corp.1688.com/page/index.htm?memberId=poqwe321&fromSite=company_site&tab=companyWeb_detail) Hebei Baoding, a leader in plastic bags over the years, the company implementing the scientific management, innovation and development, honesty and trustworthiness policy, and satisfy customer needs. Red plastic factory in leadership with the staff warmly welcome all inquiries negotiations to create the red flag Plastic Factory a better future.